Vpn; Pptp - Pakedge RE-1 User Manual

VPN

PPTP

The router supports Point-to-Point Tunnel Protocol VPN. You can connect to the router remotely and have
access to all network resources.
To configure PPTP VPN:
1. Hover over Services, then click VPN.
2. Select Enable.
3. There is a default pakedge user. The default password for this user is pakedgev. Click Apply to
enable the VPN with this default user.
4. You can change the username and the password.
5. You can also add a second user to the VPN by clicking Add New Item.