Nat; Port Forwarding - Pakedge WR-1 User Manual

5. The Lease time field allows you to view/modify DHCP IP address lease time. The
following format must be used: A D represents days, an H represents hours and an M
represents minutes. For example, if you wanted to change the lease time to be 3 days 2
hours and 30 minutes, you would set the lease time to 3D2H30M.
6. Click Apply to finalize your settings.

NAT

Port forwarding

Port forwarding allows services inside the network to be available from the Internet. For example,
if you have an IP camera on your network, port forwarding would allow you to remotely view the
camera.
To configure port forwarding:
1. From the Dashboard, click Network, then click NAT.
2. As an example, we will forward TCP port 80 to an IP camera on the IP address
192.168.1.50. Click Add new.
3. For the
DESCRIPTION
. For the
PORT
. For
INT PORT
WR-1 Wireless Router User Guide
, enter IP Camera. For the
, select Custom and enter 192.168.1.50. Enter 80 as the
INTERNAL IP ADDRESS
, select Disabled. Click Apply.
SOURCE NAT IP
, select TCP. Enter 80 for the
PROTOCOL EXT
25