Table of Contents
Advertisement
3. You will get a message letting you know that port 5 will be turned into the Isolation Guest network
port. Click OK to enable the isolated guest network.
Virtual DMZ
The Virtual DMZ will allow you to place a device in the network outside of the firewall. This will allow for
unrestricted access to it from the Internet.
To configure the Virtual DMZ:
1. Click Virtual DMZ.
2. Select Enable. For the DMZ computer's IP field, you can select the device from the drop down
menu. If the device is not listed you can select custom to manually enter the IP address of the
device you would like to place in the DMZ. Click Apply to finalize the configuration.
Note: When you enable the Virtual DMZ you will still be able access the routers GUI remotely via
HTTPS, and you will still be able to use the VPN feature.
Hide quick links:
Advertisement
Table of Contents
