Pakedge RE-1 User Manual page 38

4. Enter the name of the website that you wish to block. In this example, we will block
www.yahoo.com. Towards the right hand side you can select the device that you want to block the
website for. You can select all clients to allow it for every device on the network.
5. You can continue adding websites by clicking on Add New Item.
6. Click Apply when you are finished. The websites you entered will now be blocked.
7. If you use the Block Websites feature the router will also need to use a secondary IP address on the
network. There is a message on the Block Websites page to warn you about this. Ensure that the IP
address listed is not in use by any other device on the network. This secondary IP is only used for
the Block Websites feature; the management GUI of the router remains unchanged.
Note: After you have blocked a website on the router, you must clear the DNS cache on any
devices on the network. You can do this by rebooting the devices.
8. The Block Clients feature will allow you want to block certain services from accessing the Internet.
Click Block Clients.