Pakedge RE-1 User Manual page 36

3. Select Enable. For the Service drop down menu, select your DDNS provider. For the Hostname,
enter the full domain name that you signed up for. In the Username field enter the username for
your account with your DDNS provider. For the Password field, enter the password for your
account.
4. For the Source of IP address field select Zone. For the Zone field select WAN. The Check for
change IP every field indicates how often the router will check to see if the WAN IP address has
changed. The Check-time unit indicates the unit of time that is used for the Check for changed IP
every field. The Force update every field indicates when the router will force an update with the
DDNS provider. The Force-time unit indicates the unit of time that is used for the Force update
every field. Click Apply.
5. You can add a secondary DDNS profile to the router. In case the first DDNS provider does not work
the secondary profile can act as a backup. To add a secondary profile simply click Add and fill out
the information as you did in steps 2 and 3.