Settings; Connecting To The Internet - Pakedge RE-1 User Manual

Under Network you will find a summary of the network zones that are active on the router.
The DHCP Leases section shows the devices that have received an IP address form the router.
Other Connected Devices will display any device that has been discovered by the router. When a device
on the network transmits data, the router will log its IP address. Usually devices with static IPs assigned to
them will appear in this field.

Settings

Connecting to the Internet

The router supports the three main types of Internet connections:
• DHCP (Typically used by cable companies and DSL basic service)
• Static IP (Fixed public IP address mostly used by Business Class Broadband services)
• PPPoE (Used by DSL companies such as AT&T)
Determine what type of Internet connection you have from your Internet Service Provider (ISP), and then
follow one of the three instruction sets below to connect the router to the Internet.
DHCP
By default, the router will connect to the Internet using DHCP. If your ISP uses DHCP, you may need to
reset the modem to get Internet access. If you are using a modem that has a router built into it, you may
have to configure DMZ settings to allow complete functionality of the router.