INSTALLATION
10 ASSEMBLING THE MODULES .... CONTINUED
7. Position Master Module and level feet using a 13mm spanner. Check module with spirit level.
IMPORTANT. ENSURE MODULE IS LEVEL IN BOTH DIRECTIONS TO ENSURE SATISFACTORY ASSEMBLY.
8. Position Slave Module to LH side of Master Module (ensuring not to disturb levelled Master Module) and
repeat levelling process.
9. Remove 4 screws on each control box support
10. Replace with the one piece front controls channel and
channel and discard channels.
secure with 6 screws (located in casing assembly pack).
IMAX XTRA -
14
Installation & Servicing