Advertisement
Quick Links
USER GUIDE
IMAX XTRA EL
320-620kW
When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance
specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our website www.idealcommercialboilers.com
where you can download the relevant information in PDF format.
June 2018
UIN 212631 A06
Advertisement
Related Manuals for IDEAL IMAX XTRA EL 320
Summary of Contents for IDEAL IMAX XTRA EL 320
- Page 1 When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
-
Page 2: Important Notes
Important Notes IMAX XTRA EL • If the boiler is installed in a compartment then the 320, 395, 470, 545, 620 compartment MUST NOT be used for storage purposes. • Do not store objects around or on the boiler, and keep access Natural Gas only clear at all times. - Page 3 BOILER CONTROLS / DISPLAY BURNER ON CHANGE SELECT ENTER RESET Standby Mode Standby Mode If the boiler has been switched to Standby Mode the following screen will be displayed For Central Heating No Boiler operation will take place with this setting. select Winter Mode For Hot Water select Summer or Winter...
- Page 4 Press SELECT and a screen similar to the following will be displayed The kW output number in the 1st line will vary depending on the Ideal IMAX XTRA EL 320kW maximum output of the boiler. Ideal IMAX XTRA EL 320kW Normal Operation Set Flow Temp’...
-
Page 5: Frost Protection
To shut Down the Boiler 3. Caution when using warm water as this may freeze and cause other localised hazards. 1. For short periods 4. Once the blockage is removed and the condensate can flow Set the external controls to OFF. Wait 4 minutes and then freely, reset the appliance.