IDEAL IMAX XTRA E320 Installation And Servicing page 13

9 ASSEMBLING THE MODULES
1. Fit spacers x 4 to the LH side corners of the Master Module chassis (located inside casing assembly pack).
2. Control Fascia Panel - Master Module: Remove the 2
screws securing the control fascia panel. Carefully lift it
slightly and lower the top forwards allowing it to rest on the
hinge lugs.
4. Control Fascia Panel - Slave Module: Remove 2 screws
securing the outer fascia panel. Lift and remove fascia, store
safely.
6. Remove and discard fascia retaining bracket (x 4) from Slave and Master modules.
IMAX XTRA -
Installation & Servicing
INSTALLATION
Spacers (x4)
3. Release the ribbon cable from the display board. Raise
control fascia slightly and withdraw. Store safely.
5. Remove 2 screws securing inner fascia panel. Lift and
support panel while releasing ribbon cable from the display
board. Remove fascia and store safely.
13