H-Flume *, P3 = 11 - Siemens OCM III Instruction Manual

H-FLUME *, P3 = 11

'U' parameters required *
U0 = maximum listed head, h
*
as developed by the U.S. Department of Agriculture, Soil Conservation Service.
**
obtain from manufacturer's specifications.
Reference
RATIOMETRIC CALCULATION, P4 = 1
For flows that can be calculated by the equation:
q = q x f(h/h )/f(h
cal max
where : q = flow rate
q = flow rate at maximum head
cal
f(h/h ) and f(h
max
¤
Refer to Operation \ Flow Calculation.
7ML19985AB01
max
¤
/h )
cal max
/h ) are determined by polynomial synthesis
cal max
OCM III 78