Bus Connectors - Siemens simatic c7-621 Hardware Installation Manual

Configuring an MPI Network
3.5

Bus Connectors

Purpose of the
The bus connector is used to connect the PROFIBUS LAN cable to the MPI
Bus Connector
interface. This establishes the connection to further nodes.
There are five different bus connectors:
No Area of You do not require a bus connector for the RS 485 repeater.
Application
3-12
Up to 12 Mbps PROFIBUS bus connector (6GK1500-0EA00)
Up to 12 Mbps
– Without PG interface (6ES7 972-0BA10-0XA0)
– With PG interface (6ES7 972-0BB10-0XA0)
Up to 12 Mbps, with swivelling cable outlet (straight or angled)
– Without PG interface (6ES7 972-0BA20-0XA0)
– With PG interface (6ES7 972-0BB20-0XA0)
C7-621 / C7-621 AS-i Control Systems
C79000-G7076-C621-01