Profibus Bus Connector - Siemens simatic c7-621 Hardware Installation Manual

3.5.1

PROFIBUS Bus Connector

Appearance
Figure 3-7 shows the PROFIBUS bus connector with order number
(6GK15000-0EA00.)
6GK1500-0EA00
Figure II:
Bus connector for the first and last node on the PROFIBUS network. The
cable can be connected either from the left or right.
"ON" (terminating resistor activated).
Figure III:
Figure 3-7
C7-621 / C7-621 AS-i Control Systems
C79000-G7076-C621-01
Switch setting for the first and last station on the PROFIBUS network:
The cable shield must lie on the bare metal.
Terminator resistor deactivated.
The cable shield must lie on bare metal.
II
III
Appearance of the PROFIBUS Bus Connector
Configuring an MPI Network
3-13