Configuring The Drive Motors And Checking The Topology - Siemens SINAMICS S120 Getting Started

Creating the Drive Project ONLINE
5.4

Configuring the drive motors and checking the topology

Now that you have entered the component topology and configuration for the
drive unit and integrated these in the STARTER project automatically by carry-
ing out the steps described in Section 5.3, carry out the following steps to con-
figure the drive motor and check the topology.
Fig. 5-14
1. In the project navigator, choose the Drives folder and double–click Drive navi-
gator under the drive.
The Drive navigator dialog box provides an overview in which you can configure
the main drive functions.
5-76
Double-click
Drive navigator.
Project_1 configuration
SINAMICS S120 Getting Started with the STARTER Commissioning Tool – 03/2006 Edition
 Siemens AG 2006 All rights reserved