EverFocus EQH5102 User Manual page 12

Use the  and  buttons to select OFF, BLC and WDR. Please notice the WDR is only working
on round 7.5FPS.
WDR_WGT
Use the  and  buttons to increase or decrease the WDR weight from 0 to 4.
BLC OSD, POS and SIZ
Select OFF to disable the BLC function, or select ON to enable the BLC function and for further
setup. After selecting an area block, enter the BLC POS / SIZ and X/ Y setup page, a "POSITION"
sign displayed on the screen. Use the direction buttons to move the area to the desired
position. Press the Enter / Confirm button to confirm the position, a "SIZE" sign displayed on
the screen. Use the direction buttons to adjust the size for the area.
5.1.5 3D‐DNR
Press the Enter / Confirm button to enter the submenu.
Switch to HIGH, MIDDLE, LOW and OFF to enable or disable noise reduction on dynamic
recordings.
5.1.6 MOTION
Press the Enter / Confirm button to enter the submenu.
8
EQH5102 1080p Mini Box Camera