2. Overview
No.
Name
1
HDcctv Output
2
OSD Menu Joystick
3
Screwless Terminal Strip
4
Power LED
5
Grounding Stud
6
Test‐Out
3. Installation
3.1 Lens Installation and Adjustment
You can install either a CS‐mount or a C‐mount lens into the camera. It is recommended to use
a lens with aperture ratio of F/1.2 or lower. Please refer to the following reference steps.
CS‐Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Adjust the lens using the Focus / Zoom Screws.
Descriptions
Connects to a HD device using a 75 Ohm BNC‐type coaxial
cable.
Use the joystick to configure the settings in the OSD
menu.
Connects to a 12VDC power, RS‐485 and MD (Motion
Detect) source.
Glows red then power is present.
Ensuring a good grounding when used.
Connects to a SD monitor for setting image aim and
focus.
2
EQH5102 1080p Mini Box Camera