Table of Contents
Advertisement
If you are using a DC Auto Iris lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Connect the DC cable to the DC Auto Iris Lens Connector.
4.
Lock the Focus Screw.
C‐Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body using the supplied C‐mount lens adapter.
3.
Adjust the lens using the Focus / Zoom Screws.
Warning: Installing a C‐mount lens without the C‐mount lens adapter may damage the
camera sensor.
3.2 Top / Bottom‐Mount
You can use the supplied mounting bracket and screw it on the top of the camera body to
suspend the camera, or on the bottom of the camera body to support the camera.
4. Basic Connection
1.
Connect the camera to an HD device, such as an HDcctv DVR, to display the image.
2.
Connect the camera to a 12VDC power source using the supplied Power Cable. You can
optionally use the supplied Power Pigtail Cable or a power adapter to connect the Power Cable
to the power source. The power LED will be lit in red.
3.
Connect the camera to a CVBS portable monitor for setting image aim and focus before
mounting the camera.
5. Configuration in the OSD Menu
You can use the Joystick on the rear panel of the camera to configure camera settings in the OSD
menu. For details on the OSD menu structure, see OSD Menu Structure in Appendix.
EQH5102 1080p Mini Box Camera
3
Advertisement
Table of Contents
