Page 2
Notice This manual is presented to the users of EQ150 by EverFocus Electronics Corp. With years of engineering researches, EverFocus has spared no effort to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice.
Table of Contents Safety Warning …………………………………………1 Introduction……………………………………………..2 Specification…………………………………………….3 Major Parts and Their Functions………………….…..4 Installation Instructions………………………….….…8...
Safety Warning 1. Handle the camera with care. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to prevent any damages to it. Do not disassemble it or place it on an unstable base. 2.
Introduction The new EQ150 series is a solid-state color video camera specially designed for high quality surveillance applications. It incorporates break through DSP technology that provides most reliable and accurate color picture in security industry. The camera is convenient to use with C-mount or CS-mount lenses and easy back-focus adjustment help to achieve installation efficiency.
Specification Pickup Device 1/3" SONY B/W CCD 768 x 494 (EIA) Picture Elements 752 x 582 (CCIR) Horizontal Resolution 560 TV lines Sensitivity 0.01 lux/F=1.2 S/N Ratio Over 48 dB Electronic Shutter 1/50(1/60)~1/100,000 sec Auto Iris Video / Direct Drive switch Flickerless On/Off Back Light Comp.
Major Parts Names and Their Functions Front Side Side Rear Rear (EQ150) (EQ150A)
Page 9
1. Focal Length Adjustment Ring Use this ring to adjust the appropriate focal length according to the type of lens. Rotate the ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The factory setting is C-mount. 2.
Page 10
ES (Electronic Shutter) Off/On ES ON: The camera continuously adjusts the shutter speed from 1/60 (EIA), 1/50(CCIR) second to 1/100,000 second according to the luminance conditions of the scene. ES OFF: The shutter speed is fixed at 1/60 (EIA), 1/50 (CCIR) second. Set ES OFF, when auto iris lens is used or flicker is observed under a very bright fluorescent lamp.
Page 11
VD/DD (Auto Iris lens Type) For video drive auto iris lens, please set switch to VD. For direct drive iris lens, set switch to DD. The default setting is DD. Wire the cable of lens to lens connector according to the following table. Pin1 Pin2 Pin3...
Installation Instructions 1. Remove the cover cap from the top of the lens mount. 2. To attach a C-mount/CS-mount lens, turn the focal length adjustment ring to the appropriate position. Note: If a C-mount lens is used, please make sure the focal length adjustment ring is set at C position before fixing the lens.
Page 13
Chiba city 261-7118, Japan TEL: 631-436-5070 TEL: +81-43-212-8188 FAX: 631-436-5027 www.everfocus.com Your EverFocus product is designed and Ihr EverFocus Produkt wurde entwickelt und manufactured with high quality materials and hergestellt mit qualitativ hochwertigen components which can be recycled and Materialien und Komponenten, die recycelt reused.