Front Rack Removal - cectek Gladiator Service Manual

FRONT RACK REMOVAL

(2)
2. Hold the key position cover
3. Pull the key position cover out
4. Keep the cover face up to
Reversely perform the below
process to install.
1. Loosen the two bolts under the
(1)
2. When install torque 10Nm.
88
and turn it counterclockwise to
dead left point.
from the key hub. It could be
easier that using you finger as
a stop then drawing the cover
out.
prevent the scratch on the
marks.
RHS front cover but not remove
them.