cectek Gladiator Service Manual page 108

REAR BOTTOM PROTECTOR
REMOVAL
MIDDLE BOTTOM PROTECTOR
REMOVAL
(1)
(2)
(6) (5)
Reversely perform the below
process to install.
1. Remove the 2 bolts on the rear
side of rear bottom protector.
2. When install torque 10Nm
3. Remove the 2 bolts on the LHS
and RHS of rear bottom
protector.
4. Pull the rear bottom protector
down to remove it.
5. When install torque 10Nm.
Reversely perform the below
process to install.
1. Remove the 6 bolts on the
middle bottom protector.
2. Pull the middle bottom
(3)
protector down to remove it.
3. When install torque 10Nm
(4)
101