The Piston And Connection Rod Assembly - cectek Gladiator Service Manual

CECTEK 500cc EFI ENGINE
Only trained and certificated technician can disassembly the
CECTEK RSGA 500 EFI ENGINE. Improper disassembly may damage
the engine. CECTEK can not provide the warranty to the engine
which has not been properly disassembled and assembled by trained
and certificated technician.

THE PISTON AND CONNECTION ROD ASSEMBLY

NO. PART NAME
1. CONROD ASSY.
2. PISTON PIN
3. CLIP
4. PISTON-A
5. PISTON-B
6. PISTON RING TOP
7. PISTON RING SECOND
8. PISTON RING OIL CONTROL
ASSEMBLY
CAUTION：
1.Before assembly , must confirm
if the piston (4,5) is matching
the category of liner
2.A category piston only can be
installed on A category liner
3.A category piston only can be
installed on B category liner
4.Make sure the liner size mark
of the cylinder block
45
PART NO.
40098013
40090024
40090027
40096011
40096012
40096013
40096014
40096015