cectek Gladiator Service Manual page 62

THE CYLINDER HEAD ASSEMBLY (3/3)
NO. PART NAME
1. CAM SHAFT
2. ROCKER ARM ASSY. (INTAKE)
3. ROCKER ARM ASSY. (EXHAUST)
4. SHAFT
5. PLATE
6. FLAT HEAD SCREW
Please clean up correlative parts and lubricate with 10W/40 oil
1.Install cam (1) through cam bore
2.Install intake rocker (2) on the cam shaft , the rocker face toward
intake side.
3.Install exhaust rocker (3) on the cam shaft , the rocker face toward
exhaust side.
4.Install shaft roecker assy (4) x2 through intake rocker (2) and
exhaust rocker (3)
5.Install the screw (6) through plate (5) and tighten to 9Nm ,
attention for the bottom of plate shall be clipped onto the groove of
cam shaft.
6.Adjust the intake/exhaust valve gap to 0.3 mm.
PART NO.
40070068
40078016
40078017
40070063
40070065
SCF060160883
55