The Lay Shaft Assembly - cectek Gladiator Service Manual

THE LAY SHAFT ASSEMBLY

NO. PART NAME
1. LAY SHFAT
2. CYLINDRICAL ROLLER BEARING
3. NEEDLE BEARING (HALF CAGE TYPE)
4. LOW SPEED DRIVEN GEAR (45T)
5. RETAIN C-RING
6. HIGH SPEED DRIVEN GEAR (36T)
7. WASHER
8. HNEEDLE BEARING (CAGE TYPE)
9. REVERSE DRIVEN GEAR (34T)
10. RETAIN C-RING
11. ADJUSTING WASHER
12. BEARING (DOUBLE ROW ANGULAR)
13. WASHER
14. FLAT HEAD SCREW
Before install gear and bearing , please lubricate with 10W/40 oil
1.Install bearing (2) into lay shaft (1) , be shall install bearing of long
side into bevel gear side
2.Install needle bearing (3) into lay shaft , then install low gear (4) into
lay shaft , be shall install low gear (4) of plane into bevel gear side
3.Install retain C-ring (5) into lay shaft of groove
4.Install high gear (6) into lay shaft , be shall install high gear (6) of
fork groove side into another bevel gear side
PART NO.
46030002
CRBNU1007NR
46030031
46030007
RCS030
46030005
46030010
46030030
46030008
RCS025
46030016-26
46030029
46030012
SCF060200883
50