cectek Gladiator Service Manual page 109

FRONT LHS & RHS FENDER
REMOVAL
(4)
FRONT LHS & RHS A-ARM
PROTECTOR REMOVAL
FRONT LHS & RHS A-ARM
PROTECTOR REMOVAL
(1)
(2)
(3)
102
Reversely perform the below
process to install.
1. Remove the 4 bolts on the
fender and lift the fender up to
remove it.
2. When install torque 10Nm
Reversely perform the below
process to install.
1. Remove the 2 bolts on the
A-arm protector then remove
the protector.
2. When install torque 10Nm.
Reversely perform the below
process to install.
1. Remove the 2 bolts on the
A-arm protector then remove
the protector.
2. Remove the bolt on the front
side of rear A-arm protector
then remove the rear A-arm
protector.
3. When install torque 10Nm.