Advertisement
Drawer (O)
O3
O2
STEP 1
Attach O1 to O3 and O4, using
a Phillips screwdriver and
long wood screws (6X),
tighten halfway.
Attach O2 to O3 and O4 using
long wood screws (6X),
tighten halfway. (see Figure 1)
O1
O3
O5
O2
STEP 3
Insert short wood screws (4X)
into the pre-drilled holes in O5,
tighten screws. (see Figure 3)
Part List
O1.
Front Part
1 pc.
O1
O4
Figure 1
O4
Figure 3
O2.
Back Part
1 pc.
Assembly Instructions 7/7
O3
O5
O2
Figure 2
STEP 4
Attach hardware pulls with
machine screws.
(see Figure 4)
Tighten all screws used in
drawer assembly.
O3.
Side Part
Side Part
1 pc.
O1
O4
STEP 2
Slide O5 into the grooves in O3
and O4. Be sure to push O5 all
the way forward so it meets O1.
(see Figure 2)
Figure 4
O4.
1 pc.
O5.
Base Part
1 pc.
Advertisement
