Advertisement
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench and in a safe place as you may need to tighten up the Cam Locks in the future.
* After assembly item must be level to work properly . Use the included adjustable levelers to level.
A
Step 1
Put Cam Lock Screws into the pre-drilled holes of Side Panel (A), (C) and Middle Panel (B) and
tighten. (see Figure 1)
Step 2
Attach Back Rails (F) to
Side Panel (C) with Cam Locks.
(see Figure 2)
Slide Back Panel (D) into unit.
Attach Front Rail (H), (I) and
Plinth (K) to unit with Cam Locks.
Attach Side Panel (B) to unit with
Cam Locks.
Cam Lock Screw
Figure 1
Assembly Instructions 2/7
B
Figure 2
H
F
B
D
I
K
F
C
Cam Lock
C
Advertisement
