Advertisement
Drawer (M)
Figure 1
STEP 1
Attach M1 to M3 and M4, using
a Phillips screwdriver and
long wood screws (4X),
tighten halfway.
Attach M2 to M3 and M4 using
long wood screws (4X),
tighten halfway. (see Figure 1)
M3
M2
STEP 3
Insert short wood screws (4X)
into the pre-drilled holes in M5,
tighten screws. (see Figure 3)
Part List
M1.
Front Part
1 pc.
M1
M3
M2
MAKE SURE ROLLER
IS ON THE BACK
M1
M5
M4
Figure 3
M2.
Back Part
1 pc.
Assembly Instructions 5/7
M4
M3
Figure 2
M5
the way forward so it meets M1.
STEP 4
Attach hardware pulls with
machine screws.
(see Figure 4)
Tighten all screws used in
drawer assembly.
M4.
M3.
Side Part
Side Part
1 pc.
1 pc.
M1
M2
STEP 2
Slide M5 into the grooves in M3
and M4. Be sure to push M5 all
(see Figure 2)
Figure 4
M4
M5.
Base Part
1 pc.
Advertisement
