Page 1
88 5002 79 Traditions Kitchen Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this...
Page 2
Assembly Instructions 2/7 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench and in a safe place as you may need to tighten up the Cam Locks in the future. * After assembly item must be level to work properly .
Page 3
Assembly Instructions 3/4 Assembly Instructions 3/7 Cam Lock Step 3 Attach Back Rail (E) and Front Rail (G) to unit with Cam Locks. (see Figure 2) Attach Stretcher (J) to unit with Wood Screws for Stretcher. Wood Screw for Stretcher (see Figure 3) Attach Side Panel (A) to unit with Cam Locks and Wood Screw for...
Page 4
Assembly Instructions 3/4 Assembly Instructions 4/7 Step 6 Cam Lock Screw Using the Top option that you have chosen, put the Cam Lock Screws into the pre-drilled holes of the Top. (see Figure 1) Cam Lock Step 7 Pull out the Drawers from unit. Place Top onto the unit, using Cam Locks.
Assembly Instructions 5/7 Drawer (M) Figure 1 STEP 1 MAKE SURE ROLLER IS ON THE BACK Attach M1 to M3 and M4, using a Phillips screwdriver and Figure 2 long wood screws (4X), tighten halfway. Attach M2 to M3 and M4 using long wood screws (4X), tighten halfway.
Page 6
Assembly Instructions 6/7 Drawer (N) Figure 1 MAKE SURE ROLLER STEP 1 IS ON THE BACK Attach N1 to N3 and N4, using a Phillips screwdriver and long wood screws (4X), tighten halfway. Attach N2 to N3 and N4 using long wood screws (4X), tighten halfway.
Page 7
Assembly Instructions 7/7 Drawer (O) Figure 1 STEP 1 Attach O1 to O3 and O4, using a Phillips screwdriver and long wood screws (6X), tighten halfway. Attach O2 to O3 and O4 using long wood screws (6X), tighten halfway. (see Figure 1) STEP 2 Figure 2 Slide O5 into the grooves in O3...