Advertisement
Drawer (N)
N3
N2
Figure 1
STEP 1
Attach N1 to N3 and N4, using
a Phillips screwdriver and
long wood screws (4X),
tighten halfway.
Attach N2 to N3 and N4 using
long wood screws (4X),
tighten halfway. (see Figure 1)
N3
N5
N2
STEP 3
Insert short wood screws (4X)
into the pre-drilled holes in N5,
tighten screws. (see Figure 3)
Part List
N1.
Front Part
1 pc.
N1
N4
MAKE SURE ROLLER
IS ON THE BACK
N1
N4
Figure 3
N2.
Side Part
Back Part
1 pc.
Assembly Instructions 6/7
N3
N5
Figure 2
STEP 4
Attach hardware pulls with
machine screws.
(see Figure 4)
Tighten all screws used in
drawer assembly.
N4.
M3.
Side Part
1 pc.
1 pc.
N1
N4
N2
Slide N5 into the grooves in N3
and N4. Be sure to push N5 all
the way forward so it meets N1.
(see Figure 2)
Figure 4
STEP 2
N5.
Base Part
1 pc.
Advertisement
