Using The Rs507 Hands-Free Imager; Removing The Battery; Battery Removal - Motorola MC9500-K User Manual

D - 18 MC9500-K Mobile Computer User Guide

Using the RS507 Hands-free Imager

An RS507 Hands-free Imager can be used with the MC9500-K to capture bar code data.
To set up the RS507:
Tap Start > Programs > BTScannerCtlPanel icon.
1.
If required, select the BT Scanner checkbox and then select the appropriate Com port from the drop-down list.
2.
Tap Save and Exit.
3.
Tap Start > Programs > BD Address icon. A bar code displays.
4.
Point the RS507 to the bar code. The RS507 reads the bar code and begins pairing with the MC55.
5.
Refer to the RS507 Hands-free Imager Product Reference Guide for more information.

Removing the Battery

The OEM version 01.19.11and higher provides an application that assists when suspending the MC9500-K or
when removing the battery.

Battery Removal

To remove the battery:
If the MC9500-K is in suspend mode, press the red Power button to wake the device.
1.
Press the red Power button to suspend the MC9500-K. The Power Key Action screen appears.
2.
PowerKey Action Window
Figure D-18
Tap Safe Battery Swap icon.
3.
Wait for the red decode LEDs to turn on and then turn off.
4.
Remove the battery.
5.