Genicam And Advanced Features; Introduction - Matrix Vision mvBlueLYNX-X Technical Manual

14 GenICam and Advanced Features

14.1 Introduction

The GenICam interface layout - the standard interface layout of the mvBlueLYNX-X - allows the most
flexible access to the features of the mvBlueLYNX-X. By default the
In wxPropView, you can see all GenICam controls of the device in Setting -> Base -> Camera -> GenICam:
As you can see, there are some controls with and without the prefix mv.
• mv prefix features are unique non-standard features developed by MATRIX VISION.
• Without mv are standard features as known from the Standard Feature Naming Convention of
GenICam properties (SFNC).
All those features are "camera based / device based" features which can also be accessed using the camera
with other GenICam / GigE Vision compliant third-party software.
MATRIX VISION GmbH
Figure 73: wxPropView - GenICam controls
22 April 2016 Version - 1.49 115