Important Information; Important Safety Instructions; Operating Considerations; Important Safety Notes - Matrix Vision mvBlueLYNX-X Technical Manual

5 Important Information

5.1 Important safety instructions

• We cannot and do not take any responsibility for the damage caused to you or to any other equipment
connected to the mvBlueLYNX-X. Similarly, warranty will be void, if a damage is caused by not
following the manual.
Handle the mvBlueLYNX-X with care. Do not misuse the mvBlueLYNX-X. Avoid shaking, striking,
•
etc. The mvBlueLYNX-X could be damaged by faulty handling or shortage.
• Do not use accessories not recommended by the product manufacturer as they may cause hazards.
• The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

5.2 Operating considerations

5.2.1 Important safety notes

Use this camera with a 12V to 24V DC power supply with following specifications: 12V, 2.5A ± 5%
•
or 24V, 1,25A, ± 5%. MATRIX VISION offers a suitable power supply with part # MV-DC1201
BLX IO.
Observe that flammable objects, water or metal do not enter the camera interior. These may lead to
•
failure or accident.
• Do not modify the camera or use the camera with external covers removed. These may cause failure,
void any warranties and pose a safety hazard.
• Stop using the camera at the approach of electrical storm (thunder audible). Protect the camera from
rain if using it outdoors.
• In event the camera shows any abnormality, switch off the camera and disconnect the power cord.
Contact MATRIX VISION.

5.2.2 Handling and cleaning

• Do not attempt to disassemble camera.
• When installing or removing a lens, take care that water or dust does not enter the inside of the
camera.

5.2.3 Installing

• Avoid installing or storing the camera in the following environments:
Environments exposed to direct sunlight, rain or snow.
♦
Environments where combustible or corrosive gas exists.
♦
Excessively warm or cold environment (Operating ambient temperature: 0 to 50 °C)
♦
Humid or dusty environment.
♦
♦ Place subjected to excessive vibration or shock.
♦ Environment exposed to strong electric or magnetic field.
• It is recommended to mount the camera on a thermoconducting surface such as aluminum or other
metals rather than plastic or wood.
• Please contact manufacturer or local distributor if you want to use additional enclosures for higher
ingress protection.
• Do not aim the camera lens at the sun or other very strong light sources.
CCD phenomenon: Smearing: Vertical smearing may appear in the image. However, this is not a
MATRIX VISION GmbH 22 April 2016 Version - 1.49 15