Debugging A Matrix Vision Sample - Matrix Vision mvBlueLYNX-X Technical Manual

Change the IP address to your needs.
6. Now, if you change the directory to /mnt/workspace you should see the samples:
cd /mnt/workspace
ls -l
7. You can now build the sample as described in the chapter before ("hammer icon") and run the binary
via the Terminals tab without copying it, e.g.
cd /mnt/workspace/LiveSnap/mvBL-X
./LiveSnap
or you can edit the Run Configurations so that the binary is executed directly (see Debugging a
sample on the mvBlueLYNX-X remotely).

18.3.6 Debugging a MATRIX VISION sample

For debugging, you may use the gdb GNU project debugger either
1. directly on the mvBlueLYNX-X camera using the native version of gdb, or
2. remotely on your development system or virtual machine.
MATRIX VISION GmbH
mvBlueLYNX-X Technical Manual
Figure 112: Eclipse - Mounting the workspace
Figure 113: Eclipse - Mounted workspace
22 April 2016 Version - 1.49 159