Fronius Selectiva 2040 2kW Operating Instructions Manual page 34

Special Charges:
The "repeat" setting defines how often the alternative charging mode should be performed
until the device reverts to the original charging setting again:
-
Disable Start Button:
-
-
Special function "Opportunity Charge":
34
Setting range: 1 to 99 repetitions
ON:
The charging process cannot be started using the "Stop/Start" key; one reason for this
is to prevent unauthorised intervention.
OFF:
The charging process can be started using the "Stop/Start" key.
When the calendar function is active, a ca-
lendar symbol (shown here with the number
"4") appears on the display.
Selecting "Special Charges" allows one or
more of the alternative charging types to be
performed temporarily:
- ON: Function activated
- OFF: Function deactivated
The following settings are also possible:
- Characteristic:
e.g. "Deep discharge 10"
- Number of battery cells:
"Cells" - e.g. 12x
- Battery capacity in Ah:
e.g. 375 Ah
To extend the usage interval of a battery,
it is possible to re-charge it at a time when
it will not be needed, e.g. during sched-
uled plant shutdowns.
- ON: Function activated
- OFF: Function deactivated
The following curve settings are available:
- Curve - e.g. RI - Pb-Wet
- Charging time - e.g. 5-6 h