Annex B - Declaration Of Conformity - Seitron CHEMIST 400 Use And Maintenance Manual

ANNEX B
DECLARATION OF CONFORMITY
The manufacturer :
with registered address in:
declares that the following products:
is in conformity with the essential requirements of directives 2004/108/CE and
2006/95/CE. The full text of the conformity certificate with EMC directives
(Electro-Magnetic Compatibility) and LVD directives (Electric Safety) is available, on
request, from the manufacturer.
The instrument is in conformity with the requirements of the European standards
EN 50379-1 and EN 50379-2
O
2
CO medium
NO
Temperature (flue gas)
Temperature (supply air)
Pressure (draft)
Pressure (differential)
Moreover the instrument is in conformity with the standard VDI4206-1 and has been
approved by the UBA committee for the use as emissions measurement device,
according to the 1.BimSchV scheme (RgG 291)
1 Valid for configurations equipped with the following sensors:
O sensor:
2
CO+H sensor:
2
NO sensor (optional):
SO sensor (optional):
2
2 Valid for configurations equipped with the following sensors:
O sensor:
2
CO+H sensor:
2
NO sensor (optional):
K900000000SE 022628A0 071013
1
for the following measurements:
Ing. Vito Feleppa
Managing Director Seitron S.p.A.
Cod. AAC SE11 - Cod. AAC SE15
Cod. AAC SE12 - Cod. AAC SE20
Cod. AAC SE10
Cod. AAC SE13.
Cod. AAC SE11
Cod. AAC SE12
Cod. AAC SE10.
Seitron S.p.A.
Seitron S.p.A.
Via Prosdocimo, 30
36061 - Bassano del Grappa (VI) - Italia
CHEMIST 400X
CHEMIST 400B
CHEMIST 401
CHEMIST 402
CHEMIST 403
CHEMIST 404N
CHEMIST 404S
2
.
83