Introduction - Patton electronics 4630 Series Getting Started Manual

SmartNode 4630 Getting Started Guide

Introduction

The factory configuration settings for SmartNode 4630 are as follows:
#----------------------------------------------------------------#
#
# 4110/4520/4630 Series
# R3.xx BUILDxxxxx
# 2005-01-18T00:00:00
# Factory configuration file
#
#----------------------------------------------------------------#
profile napt NAPT
profile dhcp-server DHCP
network 192.168.1.0 255.255.255.0
include 192.168.1.10 192.168.1.19
lease 2 hours
default-router 192.168.1.1
context ip router
interface eth0
ipaddress 172.16.40.1 255.255.0.0
use profile napt NAPT
interface eth1
ipaddress 192.168.1.1 255.255.255.0
context ip router
dhcp-server use DHCP
port ethernet 0 0
encapsulation ip
bind interface eth0 router
no shutdown
port ethernet 0 1
encapsulation ip
bind interface eth1 router
no shutdown
Introduction
E • SmartNode 4630 factory configuration
#
#
#
#
#
#
51