C Cabling; Introduction; Console; Connecting A Serial Terminal - Patton electronics 4630 Series Getting Started Manual

SmartNode 4630 Getting Started Guide

Introduction

This section provides information on the cables used to connect the SmartNode and the interface cards to the
existing network infrastructure and to third party products.

Console

The SmartNode can be connected to a serial terminal over its serial console port, as depicted in
CAUTION
CAUTION
Serial Terminal
Note A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each SmartNode 4000 Series device
Note
See section

Introduction

The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
When this device is used in North America, it shall be connected
to a Network Termination Device and not connected directly to
an outside POTS line.
Figure 9. Connecting a serial terminal
"Console port" on page 48 for console port pin-outs.
C • Cabling
figure 9.
44