Table of Contents
Advertisement
tance, while –15.0 dB provides the lowest usable signal strength. The
last setting, –22.5 dB, is usually only used to test the line and should
not be used in normal applications.
4)
When the unit is first turned on, the terminal screen may
appear blank. Press the [Enter] key. If your serial connection
is good, the unit will immediately display a password prompt.
The following message will appear in the middle of the
screen:
5)
Type in the password and press [Enter]. The factory default
password for the unit is (password is case sensitive):
NOTE: If the entry is incorrect, the password screen will clear
and prompt you again for the correct password. The password
you enter will not be shown. For security, asterisks will be dis-
played for each letter you type. The maximum length of the
password, which can include any character the terminal can
generate, is 16 characters.
6)
The Model 2720 will then display the Main Menu screen.
Patton Electronics
Menu Management
Enter Password: _
patton
14
Advertisement
Table of Contents
