Status (Rip2Ifconfstatus); Rip Version 2 (Statistics); Subnet Ip Address (Rip2Ifstataddress); Bad Packets (Rip2Ifstatrcvbadpackets) - Patton electronics Model 2604 Administrator's Reference Manual

T1/e1 digital access and cross-connect system (dacs)
Hide thumbs Also See for Model 2604:
Table of Contents

Advertisement

T1/E1 DACS Administrators' Reference Guide

Status (rip2IfConfStatus)

Writing invalid has the effect of deleting this interface.
valid (1)
invalid (2)

RIP Version 2 (Statistics)

By clicking on
Statistics
dow (see figure 33)It displays routing and update information for each subnet address.

Subnet IP Address (rip2IfStatAddress)

The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where
the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.

Bad Packets (rip2IfStatRcvBadPackets)

The number of RIP response packets received by the RIP process which were subsequently discarded for any
reason (e.g. a version 0 packet, or an unknown command type).

Bad Routes (rip2IfStatRcvBadRoutes)

The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family,
or invalid metric).

Sent Updates (rip2IfStatSentUpdates)

The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full
updates sent containing new information.

Status (rip2IfStatStatus)

Displays whether the Subnet IP Address is valid or invalid.

RIP Version 2 (Statistics)

in the
RIP Version 2
main window, you enter the
Figure 33. RIP Version 2 details window
13 • RIP Version 2
RIP Version 2 Status
win-
87

Advertisement

Table of Contents
loading

Table of Contents