Table of Contents
Advertisement
17 • T1/E1 Link
Introduction
T1/E1 Link Activity
The
statistics on the quality of the T1/E1 connection. The statistics listed in this section comprise those contained
in RFC 1406—Definitions of Managed Objects for the DS1 and E1 Interface Types.
Click on
T1/E1 Link
under the
T1/E1 Link Activity
The
•
Information that identifies the DS1 Interface on a managed device, indicates the type of DS1 line using the
circuit, and shows the transmission vendor's circuit identifier (see figure 42). For more information about
the objects in this window, refer to "T1/E1 Link Activity main window" on page 119.
Line Status
•
—This variable indicates interface line status. If any condition other than
Alarms Present
can click on the
these objects, refer to "Line Status (dsx1LineStatus)" on page 120.
•
Line Status—Configuration...
cuit Configuration
window. This window contains general information about the DS1 interface, amount of
time intervals passed, and kind of line coding). For more information about this page, refer to "Line Sta-
tus—Configuration" on page 122.
Near End Line Statistics—Current...
•
tistics for the current 15-minute interval. For more information about this page, refer to "Near End Line
Statistics—Current" on page 127.
118
window (see figure 42) shows the configuration of the T1/E1 Interface, and reports
Figure 42. T1/E1 Link Activity main window
Configuration Menu
main window contains the following items:
link to view the
link—clicking on this link takes you to the page that displays the
link—clicking on this link takes you to the page that displays line sta-
T1/E1 DACS Administrators' Reference Guide
to display the
T1/E1 Link Activity
Line Status Alarms
window. For more information about
main window.
No Alarms
exists, you
WAN Cir-
Introduction
Advertisement
Table of Contents
