10 • IP
T1/E1 DACS Administrators' Reference Guide
Routing Information
The IP Routing Information window (see figure 24) displays information required to route IP datagrams,
including the IP address, subnet mask, next-hop router, and interface for each network interface defined in the
DACS.
The IP Routing Information window also has a link to the O/S forwarding table where the forwarding param-
eters are displayed ("O/S forwarding table window" on page 68).
Figure 24. IP Routing Information window
Destination (ipRouteDest)
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple
routes to a single destination can appear in the table, but access to such multiple entries is dependent on the
table-access mechanisms defined by the network management protocol in use.
Desti-
To view or modify next-hop routing information for each destination, click on a destination link in the
nation
column. For more information about modifying next-hop routing information settings, refer to "IP
Routing Destination window" on page 70.
66
Routing Information