Get Responses (Snmpoutgetresponses); Traps (Snmpouttraps); Authentication Failure Traps (Snmpenableauthentraps) - Patton electronics Model 2604 Administrator's Reference Manual

T1/E1 DACS Administrators' Reference Guide

Get Responses (snmpOutGetResponses)

The total number of SNMP Get-Response PDUs that have been generated by the SNMP protocol entity.

Traps (snmpOutTraps)

The total number of SNMP Trap PDUs that have been generated by the SNMP protocol entity.

Authentication Failure Traps (snmpEnableAuthenTraps)

This value indicates whether the SNMP agent process is permitted to generate authentication-failure traps.
The variable is global. This means that by being disabled, all authentication-failure traps are disabled.
Note
The two options for this variable are:
• enabled(1)
• disabled(2)
Out
Note: It is strongly recommended that upon selecting either
enabled(1) or disabled(2), it be saved in non-volatile memory by click-
ing on Record Current Configuration under
on the Home page of the 2604 DACS. If the network management
system is re-initialized (implying power cycling) while assuming the
current configuration has been recorded, the current configuration
will not be lost.
Immediate Actions
14 • SNMP
93