16 • System Log
Introduction
System Log
The
window (see figure 38) displays the results from the system-wide error reporting subsystem.
The object parameters in the system log are all Patton Enterprise MIB object identifiers.
System Log Main Window
Besides displaying the results from the system-wide error reporting utility, the
contains links to the following:
Modify
•
—Clicking on this link displays syslog and SNMP trap daemon IP addresses, message priorities, and
maintenance information in the flash memory (see "System Log—Modify" on page 109)
Volatile Memory
•
—Clicking on this link displays timestamp and stored system log message information
("System Log—Volatile Memory" on page 113)
Non-Volatile Memory
•
stamp (see "System Log—Non-Volatile Memory" on page 114)
Click on
System Log
under the
108
Figure 38. System Log main window
—Clicking on this link displays non-volatile RAM messages with the 100-ms time
Configuration Menu
T1/E1 DACS Administrators' Reference Guide
to display the System Log main window.
System Log
main window also
Introduction