Schaerer Coffee Vito Operating Instructions Manual page 56

www.schaerer.com
56
The decalcification process consists of four stages:
• Cooling down of the machine, the "cooling down routine" (ca. 5 – 10 min).
• The decalcification system (ca. 36 min).
• 3-fold system rinsing (ca. 8 min per rinse cycle).
• Making ready for operation (ca. 5 min).
The display provides guidance through the entire decalcification process.
► Select the menu "Care".
► Select the field "Decalcification".
► Execute the optional display request for machines with a mains water supply. See option
"With water filter".
► Confirm the display request "Start decalcification" by pressing "Continue".
 The decalcification process cannot be interrupted.
1. "Cooling down routine" decalcification step
Once the machine is at working temperature, the "cooling down routine" has to be started with
[YES].
► Touch the field [YES].
 The cooling down routine starts.
 The display request "Fill water tank to max." appears.
► Field "No"
 Leads to the next decalcification stage.
► Fill and insert the water tank. Confirm the ensuing display requests with [Continue].
 The display request "Place container under outlets" appears.
► Place the previously provided 5 l container under the outlets and confirm the display re-
quest (in the case of machines with a waste water outlet (optional), confirm the display re-
quest).
 The "cooling down routine" starts (ca. 5-10 min).
 A display request to empty the container and drip tray appears.
► Empty the container and drip tray and place them under the outlets again.
2. "Decalcification" decalcification step
► Execute the optional display request for machines with an internal water filter. See option
"With water filter".
► Fill the internal drinking water tank with the correct mixture ratio of Schaerer liquid decal-
cifier and water and then insert it.
Prepare a decalcification solution with a mixture ratio of 1 to 1.5:
• Put 2 bottles of liquid decalcifier (2 x 0.75 l) = 1.5 l in the drinking water tank.
• Fill an empty liquid decalcifier bottle (0.75 l) with water 3 times and add the content to the
drinking water tank = 2.25 l
► Insert the drinking water tank with the decalcification solution.
► Continue the decalcification process by pressing the field "Continue".
► Execute and confirm the display request to "Place container under outlets".
 The decalcification process begins.
 After decalcification the request appears to rinse out the drinking water tank and drain
the collecting container and drip tray.
Service and maintenance
BA SCV_EN
V05 | 04.2013