Getting Started
Powering ON the projector
1.
To power-on a fully charged HD Pico, hold down the power button for approximately
three seconds until the projector turns on.
Powering OFF the projector
1.
Press the power button once, then again to confirm.
2.
After a few seconds, the unit should turn off fully.
Charging the projector
1.
If you want to charge your HD Pico, you can simply plug in the Micro USB cable to
any computer or USB adapter and connect the other end of Micro USB cable to the
HD Pico (5v DC port).
NOTE: The HD Pico Projector battery does not charge when it is in operation.
Chapter 2
4