Power Supply - Lucent Technologies CellPipe IAD 4A Hardware Installation Manual

Introduction

Power supply

The software loads for each CellPipe unit are different. Make certain that you
download the correct file. If you use the wrong file to upgrade, your unit will stop
functioning and you will have to restore your configuration from a backup.
Extract and save the appropriate file to the TFTP boot directory from which you will
upgrade your unit.

Power supply

All CellPipe units are shipped with a power supply. However, European users need to
purchase an additional wall outlet cable due to the regional variations in wall outlets.
Please check with your Sales Representative for the power supply and cables required
for your environment. Refer to the illustrations below.
4
Domestic power supply
CellPipe IAD 4A and CellPipe IAD 8T Hardware Installation Guide
European power supply