Table of Contents
Advertisement
NOTE: You can't connect the audio cable from both a VCR and a DVD player using the RCA
jacks because the Connection Panel can only accommodate one external audio source that uses
RCA connectors at a time.
5. Connect the power cable to an available outlet or power bar (not supplied).
6. Turn on the projector.
7. Press the VCR/DVD Player button on the Control Panel.
NOTE: If you connected the VCR or DVD player using an S-video cable, nothing happens when
you press the VCR/DVD Player button on the Control Panel. Instead, you must press the S-video
button on the projector or on the projector's remote control to switch the projector input.
VCR/DVD Player Button
8. Turn on the VCR/DVD player and press the Play button.
Connecting an External Sound System
To deliver preamplified (or low level) sound to an external room sound system
Connect standard red and white RCA audio cables (not provided) from the RCA Audio inputs on the
external sound system to the two Audio OUT jacks on the rear of the 2000i. Keep your right and left
channel connections correct for stereo sound.
26
VCR/DVD Player Button on the Control Panel
C o m p u
i o
A u d
t e
r 2
A u d
A u x
i o I n
i l i a r y
A u d
O u t
i o
Connecting Audio Cables from an External Sound System
2000i-DVX Installation Guide
Computer 2
Aux iliary
Audio
Audio
Audio In
Out
Connect red and white RCA audio
cables to external sound system here
Advertisement
Table of Contents
