Table of Contents
Advertisement
2. Hook the shelf to the keyholes, and then push the shelf firmly down.
3. Push the captive thumbscrew at the bottom of the shelf into the thumbscrew hole and tighten.
Matching the Computer Resolution to the Projector Resolution
It's very important that the computer and projector resolutions match so the projected image properly
fills the screen. Since the projector resolution is 1024 x 768 (XGA), you must ensure the computer
resolution is also set to 1024 x 768.
NOTE: If the computer resolution is set to anything other than this optimal resolution, you may not
see the entire image, or the image may be too small to fill the screen, even with further adjustments.
To set your computer's resolution to match the projector resolution (Windows
operating system)
NOTES
•
You may need to perform the following procedure using your computer monitor, as resolution
differences can impair the visibility of the image on the interactive whiteboard screen.
•
This procedure may vary, depending on which version of the Windows operating system you're
running.
1. Click the Start button and then select Settings > Control Panel.
The Control Panel window appears.
2. Double-click Display.
Attaching the Shelf
2000i-DVX Installation Guide
Keyholes
Captive Thumbscrew
21
Advertisement
Table of Contents
