Viewing, Disabling, Or Removing Certificates; Ethernet Communication - Honeywell dolphin 75e User Manual

To install an encrypted certificate or key file:
1. Copy the certificate from your computer to either the root directory of the Internal storage on the terminal or the root
directory of an installed SD (optional).
2. Touch All Apps
3. From the Open from screen, select a storage location (e.g. Internal storage or SD card), and then navigate to where you
saved the file.
4. Touch the file name of the certificate or key store to install it.
5. If prompted, enter a password and then touch OK.
6. Enter the name of the certificate.
7. Select either VPN and apps or Wi-Fi in the credential use menu, and then touch OK.
Note: Once an encrypted certificate is installed on the terminal, it is automatically deleted from the original storage location.

Viewing, Disabling, or Removing Certificates

Touch Trusted credentials from the Security menu to view all the security credentials installed on the terminal. Tabs
organize the certificate authority (CA) certificates into two categories: System and User. Touch a certificate name to view
additional details about the certificate.
To disable a system certificate or remove a user certificate:
1. Touch All Apps
2. Touch the certificate name from the System or User list that you want to disable or remove.
3. Scroll to the bottom of the details screen.
4. Touch Disable (for System certificates) or Remove (for User certificates).
5. Select OK to confirm.
Note: System certificates that are disabled can be enabled using the same method at a later date but User certificates are
permanently deleted if removed.

Ethernet Communication

See Establishing Ethernet Communication
6 - 6
> Settings > Security > Install from SD card.
> Settings > Security > Trusted credentials.
on page 9-5.