Honeywell dolphin 75e User Manual page 33

Touch Panel
The color 4.3 inch WVGA (480 x 800 resolution) multi-touch capacitive touch panel is covered with an industrial protective
lens for greater durability. The touch panel can be activated with a finger or with the optional stylus.
Note: To conserve battery power the touch screen dims and then turns off after a period of no activity. Press the Power
button to wake the terminal from Sleep Mode (Suspend mode). See
information on how to adjust sleep (timeout) settings.
USB Door/Micro USB Port
The micro USB port is located under the protective USB door on the right side of the terminal. To access the micro USB
port, gently lift the top edge of the door closest to the digital microphone.
The micro USB port in conjunction with the USB Charge/Communication Cable Adapter Kit powers the terminal, charges
the main battery, and facilitates communication. The micro USB port supports low, full, and high-speed USB v2.0 client
communication with a maximum rate of 480 Mbps.
For additional information, see
and Connecting the Terminal to a Computer via a USB Connection
The Dolphin 75e should only be connected via its microUSB connector to CTIA certified adapters, products that bear the
USB-IF logo or products that have completed, the USB-IF compliance program.
Scan Status Notification LED
The light emitting diode (LED) located above and to the left of the LCD display flashes and illuminates during
scan/ image capture to provide scan status information. For additional information, see
page 3-1.
Using the USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT)
Changing the Display Settings
on page 1-14.
Using the Scan Image Engine
on page 5-2 for
on page 1-3.
on
2 - 5