Modifying An Account; Removing An Account; System; Setting The Date & Time - Honeywell dolphin 75e User Manual

Hide thumbs Also See for dolphin 75e:
Table of Contents

Advertisement

4. Follow the on-screen instructions to enter the required information for the account type selected. You may need to
provide an email address or user name and password, select security settings, and configure data sync preferences
during the setup.
5. The account appears on the Settings > Accounts list when the setup is complete. Depending on the settings you
selected during the account configuration, your terminal may automatically start to sync account data (e.g., email,
contacts, music and calendar).

Modifying an Account

To modify account settings:
1. Touch All Apps
2. Touch Personal.
3. Select Account settings.
4. Select either General Settings or a specific account.

Removing an Account

Before you can remove an account you need to determine if the account was used to initially set up your device.
account was used during setup you need to perform a factory data reset to return the terminal to its factory settings.
account was not used to initially set up our device, follow the steps below.
To remove an account that was added after the initial set up account was added:
1. Touch All Apps
2. Touch the account type (e.g., Personal, Google, Exchange).
3. Select the account.
4. Touch the three dots
5. Select Remove account.

System

Setting the Date & Time
Touch Date & time from the Settings
displayed on the terminal.
You can set the terminal to synchronize the date and time using a network connection by turning On
date & time setting or you can manually enter the values by touching Set date, Set time, or Select time zone.
To modify how the time is displayed on the screen, turn On
cycle to a 24-hour cycle. In a 24-hour time cycle, 1:00 pm displays as 13:00 pm.

Customizing Services and System Features for Accessibility

Touch Accessibility from the Settings
If a service or tool is installed on the terminal, touch the name to enable or disable the service or modify the associated
settings.
You can also access and configure the following system and display features from the Accessibility screen:
• Captions
• Magnification gestures
5 - 10
> Settings
> Accounts.
> Settings
> Accounts.
in the upper right corner of the screen.
screen to access options to configure the date, time, time zone, and time format,
screen to configure services and features that make using the terminal easier.
the Use 24-hour format setting to switch from a 12-hour
If the
If the
the Automatic

Advertisement

Table of Contents
loading

Table of Contents